2011-14 Ford Mustang GT Parts

The Mustang 5.0 is back for 2011, 2012, 2013 and 2014. The all new 2011 Ford Mustang GT 5.0 arrived with an all-new advanced 5.0 liter V-8 engine. It was code named Coyote and was developed by a passionate group of enthusiastic engineers who rallied around the common goal of delivering more than 400 horsepower in a Mustang GT straight off the showroom floor. The 2011 also saw the introduction of an all new and powerful 3.7L Duratec engine that pushes out an amazing 305HP and 280 ft/lb torque and for the first time included a true dual exhaust - that's the most horsepower a V6 Mustang has ever had and exceeds that of all the GT Ford Mustangs through the 2010 model year. The all new modern 5.0 liter four-valve Twin Independent Variable Camshaft Timing (Ti-VCT) V-8 Coyote engine in the new Ford Mustang GT will in fact now deliver 412 horsepower and 390 ft.-lb. of torque. At the same time, fuel economy is projected to be better than the previous model and unsurpassed in the segment. This all-new 5.0-liter engine is the next chapter in the development of the world-class Mustang powertrain portfolio, It's a thoroughly modern engine for the times, delivering the performance and fun-to-drive factor that enthusiasts want, while improving fuel economy. Now the engineers at BBK have developed some great Mustang performance parts to help you squeeze even more horsepower out of your new Mustang - check out the BBK Mustang Cold air kits, throttle bodies and full line of performance exhaust headers, x pipes and more here. All BBK performance parts are designed, dyno tested and built here in the USA

Click Here to Watch All Of Our Mustang Power Series Videos

 

  
 
11-14 Mustang Cold Air Kits Read More

11-14 Mustang Cold Air Kits

Increase the performance of your favorite New Mustang, increase air flow, throttle response and acceleration on any 2011, 2012, 2013 and 2014 Ford Mustang GT, V6 or GT500 with a BBK Cold Air Intake kit or Cold air induction system as they are called by some enthusiasts. BBK performance Mustang Cold air kits are offered with Chrome finish and now the all new Black out series for certain applications. Each cold air kit replaces your Mustang factory inlet and air box and can be installed easily with simple hand tools in about half and hour with no tune or modifications required. All BBK cold air kits include all hardware and silicone coupling hoses for a complete installation and best of all they will add a good 10-15 horsepower, depending on applications and other modifications.
11-14 Mustang Throttle Body Read More

11-14 Mustang Throttle Body

BBK performance is the leading manufacturer of aftermarket performance Mustang throttle bodies that increase airflow for improved throttle response, acceleration and horsepower. Every 2011, 2012, 2013 and 2014 Ford Mustang V6, GT and GT500 Throttle body is built to exceed OEM standards and as with every BBK performance product, they are direct fit replacement parts with all new OEM electronics and no modifications or tune is required. They can be installed by any one with simple hand tools in less than half an hour by any Mustang enthusiast. These throttle bodies are available to fit all 11-14 Ford Mustang 3.7L V6, 5.0 GT, and 5.4L S/C GT500 Shelby Mustangs.
11-14 Mustang Long Tubes Read More

11-14 Mustang Long Tubes

We all know the benefit of improving the exhaust flow and on most Mustang street cars shorty headers will be sufficient - However owners of the all new 2011, 2012 , 2013 and 2014 Ford Mustang GT 5.0 Mustangs looking for even more performance would be smart to think about installing a set of Mustang BBK performance long tube 1-5/8” full length headers to add even more horsepower and torque. The benefits of these long tubes on your Mustang can be felt immediately especially if you have a built engine or are installing a supercharger or nitrous oxide. Available for all Ford Mustang 3.7L V6, 5.0L GT and the 5.4L Supercharged GT500 in a Chrome or Silver ceramic and 304 stainless steel finish.
11-14 Short Mid X Pipes Read More

11-14 Short Mid X Pipes

These BBK short mid x pipes are required when installing any set of 11-14 BBK long tube full length headers on your street or race Mustang V6, GT or GT500. The unique BBK high flow X section improves the air flow over a standard H. These short mid X pipes bolt up directly to the BBK long tubes and then to your Mustang's cat back exhaust system. These 2011, 2012, 2013 and 2014 Ford Mustang short mid X pipes are manufactured from 2.5 inch CNC mandrel bent tubing and work with all BBK applicable full length Mustang headers, they are available in Off road race use only or with catalytic converters for street use (where applicable, Check Your applicable State Law before installing)
11-14 Mustang Shorty Headers Read More

11-14 Mustang Shorty Headers

All BBK Performance exhaust headers are designed and built in America and every 2011, 2012, 2013 and 2014 Ford Mustang V6 and 5.0 GT shorty tuned length header will improve exhaust flow for increased horsepower and torque over stock and offer direct bolt on compatibility to the rest of your Mustangs factory exhaust system. These Mustang 1-5/8 headers are CNC mandrel bent for unrestricted flow and are available with a chrome or silver ceramic finish - all kits include new header gaskets and header bolts for a complete installation.
11-14 Mustang Hi Flow Full Length X Pipes Read More

11-14 Mustang Hi Flow Full Length X Pipes

BBK Hi Flow direct replacement 2011-14 Mustang X-pipes offer improved performance and feature larger tubing Tubing with a merged X to maximize exhaust flow that helps improve the power of Ford's New 3.7L V6. 5.0L V8 and the New GT500 5.8L V8 engine. They are all direct fit to factory OEM exhaust headers as well as most aftermarket performance shorty exhaust headers including the new BBK CNC series for the new V6 Mustang. Available with Hi Flow Catalytic converters or as OFF Road Only Race Versions
11-14 Replacement Air Filter Read More

11-14 Replacement Air Filter

Sometimes the unexpected can happen and your BBK high flow cotton air filter included with your BBK Cold Air kit can get damaged - if that happens here we offer direct replacement filters for your Mustang kit that will fit exactly as the the original and give you more of that free flowing cool air to help get the most horsepower out of your favorite 11-14 Ford Mustang GT, LX or Cobra.