BBK Are The World Leader In EFI Performance Throttle Bodies. These BBK Power+Plus Throttle Bodies Are Direct Replacement
Performance Pulley Kits
Mass Air Meters
Intake Manifold Spacers
Aluminum Valve Covers
Clutch Quadrant Cable Kits
Gaskets & Bolt Kits
Watch New BBK Videos!
2005-13 Dodge Hemi, 300
Mopar Muscle cars are icons that changed the automotive industry. These famous Muscle cars started in the 60's and 70's with the classic Challenger's, Chargers, Barracudas and the Super Bees. Now adays these cars have been bought back to life on the LX platform with classic retro styling and modern electronic fuel injected Hemi engines. The Hemi era is back and BBK performance manufactures some of the best performance throttle bodies, Cold air intake kits and Full length, Shorty exhaust header systems to give your modern 5.7, 6.1 and 6.4L Hemi powered Dodge Charger, Challenger, SRT8, Magnum, Chrysler 300C the extra performance to make your mark on the street.
1979-93 Ford Mustang Parts
The third-generation Mustang was produced by Ford Motor Company from 1979 to 1993. Built on Ford’s ubiquitous Fox platform, it evolved through a number of sub-models, trim levels, and drivetrain combinations during its production life. The Fox body Mustang underwent a multi-faceted update for 1987, and for a time seemed destined for replacement with a rebadged import before Ford Motor company executives were swayed by consumer opinions. Ford Mustang Enthusiasts group the generation into two segments: the 1979-1986 carbureted Mustang cars, with their quad headlight arrangement, and the 1987-1993 Ford Mustangs that were EFI electronically fuel injected, with their "no-grille" front fascia styling. Production of the Fox Body Mustangs ended in 1993 with the introduction of the SN95 fourth-generation Mustang for the 1994 model year. However not surprisingly the unique styling and nostalgia of the 79-93 Ford Mustang have made them become desirable restoration projects and as such BBK performance parts manufacture some of the most popular bolt ons to make the Fox Body Mustangs perform well above stock.
1994-04 Ford Mustang Parts
What appeared in 1994 was an all new Mustang clearly influenced by the styling themes of Mustangs past. The SN95 Ford Mustang still had the familiar 5.0 liter pushrod engine with a revised intake manifold and throttle body set up but it also had great new styling, there was the galloping horse in the grille, the side scallop reappeared and the taillights were split into three segments (albeit horizontally instead of vertically). Inside, the cockpit featured a twin-pod dashboard that recalled the dashes used between '64 1/2 and '73. Only two body styles were now offered, a two-door coupe with a semi fastback roof and a convertible, availalble as a V6 with a 3.8L engine, GT or LX with the 5.0L engine and the Cobra also with a performance HO 5.0L engine. The new SN95 Ford Mustang still used the Fox platform which was thoroughly reinforced for the 1994 and 1995 Mustang, but the basic modified MacPherson strut front and coil sprung solid rear axle returned intact. Four-wheel disc brakes were now used throughout the line with ABS optional. In 1995 we saw a the limited release of the white Cobra R with a 351 engine. In 1996 the Ford Mustang GT saw the introduction of the new 4.6L Overhead cam engines and the Cobras were treated to a new 4.6l DOHC engine. The Mustang was restyled in 1999 with more refined sharper lines which would prevail through 2004 as would the engines, then it was time for a complete new body style and chassis.
2005-10 Ford Mustang Parts
The fifth generation Ford Mustang began with the 2005 model year, It was manufactured at the AutoAlliance International plant in Flat Rock, Michigan. Originally designed by Sid Ramnarace, the new Mustang's design was based on two preproduction concept cars that first debuted at the 2003 North American International Auto Show. There are several variants of the fifth-generation Ford Mustang produced including the Mustang GT, V6 the GT/California Special, Shelby Mustang GT, the Famous Black & Gold Shelby Hertz Mustang and the classic Bullitt Mustang. Ford managed to pay homage to a classic style without having the end result looking like a caricature of the original. The canted nose with its big grille and round headlights recalls the '67 to '69 Mustangs, while the side sculpting, fastback roofline and taillights recall those ponies of the 1965 vintage. Even the triangular side windows are reminiscent of what Carol Shelby did when he made the 1965 Mustang 2 + 2 Fastback into his Shelby GT 350. The new 2005 Mustang GT and V6 also saw new engines, a new 300HP 4.6L 3V and a new 4.0L V6 putting out 210 HP. In 2007 Ford entered a new partnership with Carroll Shelby to introduce the exciting new and powerful Shelby GT500. It had different aggressive body styling and a big hood to cover a supercharged 5.4L Ford Power plant pushing out 580Hp and 480 ft/lb torque. other upgrades of course was the suspension and big brakes. BBK Performance manufacture direct bolt on performance parts that will make any of these high performance Mustangs the king of the road.
2011-13 Ford Mustang Parts
The Mustang 5.0 is back for 2011, 2012 and 2013. The all new 2011 Ford Mustang GT 5.0 arrived with an all-new advanced 5.0 liter V-8 engine. It was code named Coyote and was developed by a passionate group of enthusiastic engineers who rallied around the common goal of delivering more than 400 horsepower in a Mustang GT straight off the showroom floor. The 2011 also saw the introduction of an all new and powerful 3.7L Duratec engine that pushes out an amazing 305HP and 280 ft/lb torque and for the first time included a true dual exhaust - that's the most horsepower a V6 Mustang has ever had and exceeds that of all the GT Ford Mustangs through the 2010 model year. The all new modern 5.0 liter four-valve Twin Independent Variable Camshaft Timing (Ti-VCT) V-8 Coyote engine in the new Ford Mustang GT will in fact now deliver 412 horsepower and 390 ft.-lb. of torque. At the same time, fuel economy is projected to be better than the previous model and unsurpassed in the segment. This all-new 5.0-liter engine is the next chapter in the development of the world-class Mustang powertrain portfolio, It's a thoroughly modern engine for the times, delivering the performance and fun-to-drive factor that enthusiasts want, while improving fuel economy. Now the engineers at BBK have developed some great Mustang performance parts to help you squeeze even more horsepower out of your new Mustang - check out the BBK Mustang Cold air kits, throttle bodies and full line of performance exhaust headers, x pipes and more here. All BBK performance parts are designed, dyno tested and built here in the USA
2010-13 Gen 5 Camaro Parts
The all new Gen 5 Chevrolet Camaro is the fifth generation of the Camaro to be produced since its original introduction in 1967. Production of the new Gen 5 Chevrolet Camaro began on March 16, 2009 after several years on hiatus since the previous generation's production ended in 2002. The new 2010 Camaro went on sale to the public in April 2009 for the 2010 model year. It is available in a V6 and V8 version with a 6 speed automatic or 6 speed manual transmission. The 2010, 2011 and 2012 6 speed manual Camaro SS V8 is available with a 6.2L 426 Hp LS3 V8 engine and the 6 speed automatic is powered by a 6.2L L99 400HP engine. The 2010 and 2011 Camaro V6 is powered by a LLT 3.6 liter engine that produces around 310 HP. The 2012 Camaro V6 ended up with a LFX 3.6L Chevrolet engine that featured revised lightweight aluminum cylinder heads that incorporated exhaust manifolds in the cylinder head design - this feature improved the horsepower and improved gas mileage due to weight savings. BBK performance manufactures a variety of direct replacement performance parts that meet and exceed OEM standards and help improve the horsepower and performance of all these great Gen 5 Camaro SS V8 and V6 models.
Dodge Ram Truck Parts
Owners of Dodge Ram trucks will be pleased to know that they can enjoy easy bolt on performance with one of our popular BBK Cold air intake systems or even a set of BBK CNC fully mandrel bent shorty headers available in a chrome or silver ceramic finish. Expect a perfect fit and direct replacement every time - Owners of the Dodge Ram SRT 10 and Hemi powered Ram trucks can expect some good horsepower and improved throttle response with a BBK direct replacement Power plus throttle body.The 5.7 L Hemi was released for model year 2003 on the Dodge Ram 2500 and 3500 pickup trucks to replace the Magnum 5.9 engine. It also replaced the 8.0L V-10 engine in the heavy duty Ram. As of 2004 it was the only available gasoline engine in the Ram Heavy Duty. Chrysler has since made the 5.7 L Hemi available in all models of the 2004 Dodge Ram, Dodge Durango, the 2005 Chrysler 300C, Dodge Magnum R/T, Jeep Grand Cherokee,
F Series Trucks & Expeditions
BBK Performance offer a number of products for late model Ford F series Trucks and Ford Expeditions. We now have Ford F Series performance exhaust header applications to fit 1987-1995 302, 351W Ford F150 trucks as well as 1997-08 Ford F Series and Ford Expeditions with 4.6L & 5.4L engines. We offer direct fit mandrel bent shorty 1-5/8" exhaust headers, that will bolt up to existing factory exhaust system for additional horsepower and torque.
Significantly improve intake airflow and improve the under hood looks with a BBK cold air intake system for your F Series truck, Take a look at these great looking BBK Performance Cold Air Intake System Kits Designed to fit 1997 - 2013 Ford F series Trucks, Ford Expeditions and Ford Raptor trucks with 4.6L, 5.4L and 6.2L Raptor applications, These Cold air intake systems are designed and built in the USA to help improve horsepower, acceleration and even improve gas mileage. All Ford F150 Truck Kits, Ford Expeditions and Raptor kits are designed with a high flowing CNC mandrel bent BIG chrome inlet tube and cotton element performance conical filter encased in the black powder coated filter shield.
BBK Performance have been manufacturing quality direct replacement high flow exhaust headers and exhaust systems for american built performance cars and trucks for 25 years.
BBK Catalog PDF
Download a PDF copy of the Latest BBK Performance Parts Catalog Here
This Page will have available job opportunities @ BBK Performance In Temecula CA