Improve Performance by Eliminating Flex Significantly stiffen the chassis on your 1994-2004 Mustang GT, Cobra or V6 with these BBK Gripp Subframe Connectors. The SN95 Mustang uses a uni-body chassis rather than the older style body on a full frame. One of the major shortcomings of this design is that relying on the sheer strength of the floor to prevent flexing simply doesn't work, especially when pushing the car to it's limits. To fix this flex issue, install a set of BBK Gripp Mustang Subframe Connectors to tie the front and rear subframes together as well as the seat mounts for maximum rigidity.
Bolt-On Design BBK subframe connectors are designed so they can be simply bolted in place by drilling a few holes and using the supplied hardware through the subframe and bolt the seat supports to each seat mount. This works great, but for maximum benefit we highly recommend that they are welded in place. Many home mechanics will bolt them on and then drive to a shop with a welder to finish the job. These subframe connectors are fully sealed and powdercoated charcoal grey metallic for great looks and a durability.
Installation Note: Some Cobra models and convertibles require removal of the forward bracket on the subframe connector to clear factory bracing near the transmission crossmember. This makes them a weld-on only install in those instances.
- 1994-2004 Mustang GT, Cobra or V6
- Convertible or Cobra models may require modification