|
|
Mustang 5.0 - BBK 5.0 Heads/Intake Swap |
BBK Performance parts are featured once again in Mustang 5.0 magazine on a 1989 Ford Mustang GT. BBK parts including a BBK intake manifold & throttle body (PN 5002), Cold Air Intake Kit (PN 1557),and a fuel pressure regulator (PN1706) help this naturally aspirated mustang produce 103 RWHP and 45lb-ft of torque, with plenty of room for additional gains if a blower, turbo, or nitrous are added.
|
|
|
|
|
|
GM High Tech Performance - Corvete C5 Bolt Ons |
| The techs from GM High Tech Performance go to BBK for schooling in LS1 Intake improvements. BBK's C5 Corvette Aluminum Cold Air Intake, BBK SSI-Series Intake Manifold, and a BBK 80mm Power Plus Throttle Body are installed and tested on a Corvette C5. The testing proved that the BBK products added 21hp and 13ft-lbs over OEM hardware. |
|
|
|
|
|
Mustang 5.0 Magazine 650 HP Cover Story |
A BBK Twin 62mm Throttle Body (Part #1763) is featured in this 07 Mustang GT which made the cover of 5.0 Magazine in April of 2008. View to the PDF to read about this Mustang GT that produces 631-rwhp and 18 lbs of boost.
|
|
|
|
|
|
Hot Rod Magazine Article - 06 Mustang Bolt Ons |
| BBK is featured in Hot Rod magazine again! Read a quick test on a 2006 Mustang GT that features the addition of a twin 62mm BBK Throttle Body and a BBK Cold Air induction system, along with a BBK hi flow X-pipe. The Hot Rod editors were very happy with the additional +30.1hp and 40.51 lb-ft these parts added to rear wheels. |
|
|
|
|
|
Sport Truck - Bolt On Some BBK Truck Performance Parts |
The editors at Sport Truck magazine wanted more power out of their late model F-150 so they took a trip over to BBK to find some good bolt on performance parts for their truck.
After installation and dyno testing they've found that by adding a BBK throttle body, cold air and headers they gained some valuable horsepower.
|
|
|
|
|
|
Hot Rod - Mustang Mach 1 + BBK Performance = HP |
| This Hot Rod magazine featured Mustang Mach 1 received the BBK performance make over. This Mach 1 adds some BBK Performance under drive Pulleys, a 62mm dual bore Power Plus series BBK throttle body, some BBK full length CNC headers, Shorty off road x mid pipe, MIL eliminators, and oxygen sensor extenders. |
|
|
|
|
|
Muscle Mustangs & Fast Fords - BBK 4.6 Long Tube Header Install |
BBK Full length headers and catalytic mid H pipe are used on this GT to help produce 371.5hp and 385.8lbs-ft of torque. Read and see the full installation of these performance parts.
|
|
|
|
|
|
Super Ford - BBK's Shop Car SN 377 |
| The BBK Canary yellow SN95 Mustang takes the cover of Super Ford magazine in April of 2000 with their 377 Stroked R&D Mustang loaded with the best BBK performance parts. |
|
|
|
|
|
Muscle Mustangs & Fast Fords + 55 RWHP!!! BBK Cobra Exhaust |
An Additional 55 Horsepower was acheived on a 2003 SVT Cobra after installing BBK's full length exhaust headers and catalytic short mid h pipes. Read more and see how we amazed the techs at Muscle Mustangs & Fast Fords!
|
|
|
|
|
|
Mustang 5.0 Mechanical Mustangs |
| BBK parts are featured on more mustangs in April's issue of 5.0. Read about these highly modified machines that feature a BBK 65mm Throttle Body and BBK Full Length Headers. |
|
|
|
|
|
Muscle Mustangs & Fast Fords - BBK SSI Intake |
| Read a full test article about BBK's ALL NEW 5.0 Liter SSI Intake manifold - as tested by Muscle Mustangs & Fast Fords magazine! This BBK SSI Manifold features a twin-plenum design for improved Horsepower-torque and street performance and includes BBK billet aluminum high flow fuel rails, and a BBK 70mm throttle body. |
|
|
|
|
|
Mustang 5.0 & Super Fords - BBK 5.0 Fuel Rails |
| The Techs over at Mustang 5.0 recently took time to review BBK's High Flow Aluminum Fuel Rails. These fuel rails come stock with BBK's SSI Series Intake Manifolds and could drop into a stock ford and many other aftermarket intake manifolds. |
|
|
